M&P Shield EZ and PHLster Enigma? Here’s What You Need To Know
Yes, you can use the Shield EZ with the PHLster Enigma system. But to avoid disappointment, read these tips first.
Category: Enigma
Tenicor Holsters and the Light Bearing Enigma
How to assemble a Tenicor holster with the Light Bearing PHLster Enigma. Note: Tenicor holsters can be used with the Light Bearing Enigma only. When you assemble the holster onto the faceplate, you will use some of the hardware that comes with the Tenicor holster, as described per model below. If your holster has the Tenicor Camming Bar, leave that in place. You will not remove it for Enigma assembly.
Written Instructions – Light Bearing Enigma LH
These instructions are for the Light Bearing PHLster Enigma, left handed assembly. If you are right handed, click here. If you’d prefer video instructions instead, please click here. SAFETY WARNING: Make sure your holster is compatible. Do not modify, drill, sand, or cut your Enigma faceplate in ANY way. Thoroughly read the Enigma safety page and […]
Written Instructions – Light Bearing Enigma RH
These instructions are for the Light Bearing PHLster Enigma, right handed assembly. If you are left handed, click here. If you’d prefer video instructions instead, please click here. SAFETY WARNING: Make sure your holster is compatible. Do not modify, drill, sand, or cut your Enigma faceplate in ANY way. Thoroughly read the Enigma safety page and […]
Using DCC Clips on the PHLster Enigma
Some users like to add a clip to their PHLster Enigma. Is this option right for you? What are the pros and cons? If you want to try it, what clips should you use?
Can You Use Multiple Holsters on One Enigma?
That depends on your Enigma model. Check the info below for your model. Enigma Express and Light Bearing Express We designed the Enigma Express to work with our Skeleton holsters only – click here to learn why. The Enigma Express Light Bearing is designed to work only with the PHLster Floodlight2 holster. Enigma OS – Standard […]
All of PHLster’s available resources in one place!
All relevant LBE videos in one place LBE holster fit guide and brand recommendations Full Light Bearing Enigma assembly video and full written instructions here Enigma Safety-MUST READ Video: How do I use it? Written resource: How do I use it? Video: What do I need for assembly? Written resource: What do I need for assembly? Video: […]
PHLster Enigma Instructions
Choose your PHLster Enigma model to find instructions on how to assemble it and how to adjust it. You can also find helpful info about how to wear your Enigma, how to adjust the leg leash, how to get comfortable with it, tips and tricks for success, troubleshooting, and much more.
I Just Can’t Get It To Work – Leg Leash Alternatives?
While the standard leg leash works across a wide range of shapes and sizes, no one product will be perfect for everyone. If you’re having trouble with the leg leash, first watch the entire instruction video, paying careful attention to the adjustment instructions, and try both of the routing methods shown. Proper adjustment solves the […]
What To Do With the Extra Enigma Belt or Leg Leash Material
Once you’re 100% sure you’ve got your Enigma belt or leg leash fully adjusted the way you want it, you can trim the excess tail as needed (leave at least 6-8″ of extra belt) and sear it with a lighter to prevent fraying. Make sure to leave plenty of extra slack in case your weight […]
