Learn how to find the best belt for your carry position, whether Enigma or traditional belt holster.
PHLster Guides
Sport Belt Sizing Tips | PHLster Enigma
How to pick the right size Sport Belt for your PHLster Enigma. Should you size up or down? Should you use your waist or pants size? Learn how to choose the correct size on the first try.
Sig P365 Compatibility Guide | PHLster Holsters
They’re not all the same! This guide will help you choose the correct size holster to fit your Sig Sauer P365. Includes the P365, X, XL, P365-380, XMACRO, Rose, Spectre, Tacops, and more.
How to Install the Reduced Size Buckle
Here’s how (and why!) to install and use the Reduced Size Buckle on your PHLster Enigma or Enigma Express. Full assembly instructions, written and video.
M&P Shield EZ and PHLster Enigma? Here’s What You Need To Know
Yes, you can use the Shield EZ with the PHLster Enigma system. But to avoid disappointment, read these tips first.
Floodlight2 Instructions
Start by watching the Quick Start video. Adjust your shock cord, then your retention screws. Because the Floodlight2 is a “universal” fit holster that accommodates a variety of guns, it requires a specific reholstering technique for best results. DO NOT attempt to reholster by fishing the muzzle of your gun into the top of the holster.
Tenicor Holsters and the Light Bearing Enigma
How to assemble a Tenicor holster with the Light Bearing PHLster Enigma. Note: Tenicor holsters can be used with the Light Bearing Enigma only. When you assemble the holster onto the faceplate, you will use some of the hardware that comes with the Tenicor holster, as described per model below. If your holster has the Tenicor Camming Bar, leave that in place. You will not remove it for Enigma assembly.
Written Instructions – Light Bearing Enigma LH
These instructions are for the Light Bearing PHLster Enigma, left handed assembly. If you are right handed, click here. If you’d prefer video instructions instead, please click here. SAFETY WARNING: Make sure your holster is compatible. Do not modify, drill, sand, or cut your Enigma faceplate in ANY way. Thoroughly read the Enigma safety page and […]
Written Instructions – Light Bearing Enigma RH
These instructions are for the Light Bearing PHLster Enigma, right handed assembly. If you are left handed, click here. If you’d prefer video instructions instead, please click here. SAFETY WARNING: Make sure your holster is compatible. Do not modify, drill, sand, or cut your Enigma faceplate in ANY way. Thoroughly read the Enigma safety page and […]
PHLster Ascent Pouch Instructions
Here’s how to set up your PHLster Ascent magazine pouches and install them on a belt. The Ascent pouches come in rifle or pistol sized versions, and can be purchased with or without optional belt attachments.