Get To Know Your PHLster Products
Thanks for your purchase! Choose a product below to get started.
SAFETY INFORMATION - READ THIS FIRST.
Enigma Express
The Enigma Express is pre-assembled and comes with our Skeleton holster (for specific gun models only – see fit list).
The Express faceplate has one big oval hole in the middle, and attaches to the holster with two screws. It’s made for a limited list of guns WITHOUT a light or laser attached. See the Express product page for specific fit information.
Enigma Express Fit List
PHLster Enigma Express Gun Fit List
- Beretta Cheetah 80x
- FN Reflex
- G19/G26**
- G42**
- G43/43x/G43x MOS**
- G48/G48 MOS**
- HK VP9
- SigP320c**
- Sig P365/P365X**
- P365XL**
- P365-XMacro** (P365 Macro and Macro Variants are only compatible with the Macro Express)
- Sig Fuse
- P365-380**
- Springfield Hellcat
- Hellcat Pro
- Ruger LCR
- S&W J-Frame (Does not fit the S&W Bodyguard 38)
- Shield 1.0/2.0 – 3.1in
- Shield Plus - 3.1in
- Shield Plus – 4in/3.1in
- M&P 2.0 Compact 4in
- Taurus 856
- Taurus 856 T.O.R.O.
- Taurus GX4
- Taurus GX4 Carry
- Walther PDP-F 3.5in
** NOTICE: Sig models with metal frames are not compatible. All Sig AXG and Legion models are also not compatible, regardless of frame material. Additionally, “Glock analog” pistols like P80 and Shadow Systems are not compatible.
Enigma OS - Standard
The Enigma OS - Standard comes disassembled and does not come with a holster shell. It is for guns without a light or laser attached.
The Standard faceplate has two large rectangular holes in the middle, and 6 small holes on each side. It attaches to the holster through the modwing, using two screws. It’s for guns WITHOUT a light or laser attached.
Holster Compatibility Guide
Enigma OS - Standard
The Enigma OS - Standard is compatible with a wide variety of holsters from other manufacturers. To find a compatible holster for your gun, use the Enigma OS - Standard FIT GUIDE.
Enigma Express - Light Bearing
The Enigma Express - Light Bearing is pre-assembled and comes with our Floodlight2 holster.
The Enigma Express - Light Bearing has one large, irregular hole in the faceplate, and the holster attaches with four screws. It’s made for guns with either an X300 or TLR-1 weapon-mounted light.
Enigma OS - Light Bearing
The Enigma OS - Light Bearing comes disassembled and does not include a holster shell. It is for guns that have a light or laser attached.
The Enigma OS - Light Bearing has two long, parallel slots in the faceplate. It attaches to the faceplate with four screws. It’s for guns with weapon mounted lights or lasers, as well as Tenicor brand holsters.
Holster Compatibility Guide
Enigma OS - Light Bearing
The Enigma OS - Light Bearing is compatible with a wide variety of holsters from other manufacturers. To find a compatible holster for your gun, use the Enigma OS - Light Bearing FIT GUIDE.
New Enigma Leg Leash Tips
Learn how to use the two new leg leash options that come with the PHLster Enigma! Tips for:
- How to choose which leg leash is right for you
- How to adjust
- How to wear
- Comfort tips
- Troubleshooting
Other PHLster Products
Download the PHLster holsters and accessories manual. This PDF document includes important safety information and instructions for PHLster belt-mounted holsters, clips, soft loops, wings, attachments, and a visual guide to IWB Floodlight adjustment.
Enigma Upgrade Kit Assembly Instructions — instructions for upgrading an existing Enigma with an upgrade kit.
Holster Wedge Instructions
If you have the new Wedge Rx, it's simple to use. Clean your holster and stick the included velcro loop patch to your holster shell. Then use the double-sided hook velcro to stick the wedge to the holster. For wedge placement and comfort tips, we recommend watching our wedge masterclass video below.
Using the old Modular Wedge Kit (discontinued)? Watch the instruction videos below to learn how to trim and apply it.
We also recommend watching the Poke and Check video and the Concealed Carry Comfort video, found on our Basic Concealment Mechanics page.
Trilock (Plastic Triglide Upgrade for Enigma Express)
The new Trilock provides a tighter grip on the belt webbing than the previous metal triglides. If you experience your belt loosening throughout the day, the Trilock can help. Recommended for the V2 Enigma Express and V2 Enigma Express - Light Bearing.
The Trilock is easy to use. Simply remove your existing metal triglide from your belt, and install the new one in its place. Make sure the nubs are touching the webbing when installed, as shown above.
If your belt is disconnected and you've forgotten how to route it, follow the routing instructions for either the regular Enigma belt or the Sport Belt, depending on which one you're using.
Routing the Regular Enigma Belt
Routing the Enigma Sport Belt
Floodlight2
PHLster Floodlight2 IWB Adjustment Instructions
Learn to properly adjust your inside-the-waistband Floodlight2 holster. Do this first, before using it. If you are trying to troubleshoot a fitment or retention problem, reviewing this video should be your first step.
Important: Please be sure you are reholstering correctly, and testing IWB holster retention correctly.
For more instructions, details and helpful tips about the Floodlight2, see the full FL2 instructions page.
HAVING TROUBLE REHOLSTERING? Make sure to watch the video and read the full instructions page.
Floodlight1 - Legacy
PHLster Floodlight1 (Legacy) IWB Adjustment Instructions
Learn to properly adjust your inside-the-waistband Floodlight holster. Do this first, before using it. If you are trying to troubleshoot a fitment or retention problem, reviewing this video should be your first step.
Important: Please be sure you are testing IWB holster retention correctly.
Click here for a full IWB Floodlight assembly video.
LEFT HANDED USERS
Click here for instructions on how to switch your Floodlight to a left handed configuration.
Floodlight OWB
Learn to properly adjust your outside-the-waistband Floodlight holster. Do this first, before using it. If you are trying to troubleshoot a fitment or retention problem, reviewing this document should be your first step.
Pro Holster
Use the video playlist below to learn how to use the soft loops that come with your Pro holster, or how to install different belt clips. Left handed users: you can use the “Complete Assembly Video” when switching your holster from right to left handed.
City Special Revolver Holster
City Special Retention Adjustment
To adjust the retention on your PHLster City Special revolver holster, simply loosen the screw and slide it towards or away from the trigger guard. Moving towards the trigger guard loosens the retention, and moving away from the trigger guard tightens it.
Important: Please be sure you are testing holster retention correctly.
For a full City Special holster assembly video, click through to this YouTube video.
Skeleton Pistol Holster
Here’s how to change the clip that comes with your Skeleton holster for a DCC Mod4 clip. This video can also be used to reassemble your Skeleton holster if you have taken it apart.
Summit OWB
This video shows how to configure and adjust your PHLster Summit OWB holster.
ARC Switches - X300 - Legacy
ARC Switches - X300
IMPORTANT: You install ARC switches at your own risk. GO SLOWLY, and do not force parts apart or together. Review ALL instruction material before starting.
There is some variation in the metal switch armatures in newer Surefire X300 lights. The factory switches may be difficult to remove, and the ARC switches may be difficult to install. If you encounter resistance, STOP before you break your light. Try the tricks in these videos:
If your factory switches are difficult to remove, watch this.
Hot water trick for getting the ARC switches on easily.
If you’re wondering why some switches are difficult, discussion here.
If you continue to encounter difficulty, STOP and contact PHLster customer support.
ARC Switches - TLR1
Use these instructions to learn how to install Arc Switches on a TLR1.
Ascent Magazine Pouches
Here’s how to use the PHLster Ascent pouches
Comfort Tips - All Products
Concealed Carry Comfort Tips
How to get comfortable with your concealed carry gun and holster. Technique tips, holster comfort mods, and carry position advice for ALL body types, including how to sit with an appendix carry holster. This is not just for PHLster holsters and not just for appendix carry – you can make any brand of IWB (inside the waistband) holster more comfortable by learning these skills.
Retention Too Tight?
IWB Holster Retention Too Tight?
The Enigma Express, PHLster Skeleton, and PHLster Pro Holsters have fixed retention, and are not adjustable by the user. If your holster retention feels too tight, please watch this video. Note that aftermarket parts and modifications, including frame or trigger guard stippling, can affect your holster’s retention feel.
Important: Please be sure you are testing holster retention correctly.