PHLSTER

Fit Features

Slide Mounted Optic

Compatible

Suppressor Sights

Compatible

Orientation

Ambidextrous

Sweat Guard Height

Medium

Muzzle Device

Comped and Threaded Barrels

Fit

Glock 9mm/40 (G26-34)
Glock 43/43x/48 (And MOS)
Walther PDP/PDP-F
Sig P365/P365x/P365XL (with and without thumb safety)
Sig P320 M17, M18 (except .45/10mm, SubCompact, or metal frames)

Note: does not fit P80,
Shadow Systems, or other aftermarket frames.

PHLster Pro Holster

The PHLster Pro Holster comes standard with a pair of adjustable IWB loops and an adjustable ModWing to reduce printing. Add a Discreet Carry Concepts Monoblock Clip for increased versatility and customization.

The PHLster Pro Holster is compatible with optics, suppressor sights, threaded barrels.

Compatible fits are strictly limited to: 9mm/40 Glock 26-34 (Gen 5 .40 cal Glocks will not fit), G43/43x/48 (MOS included), Gen5 9mm Glocks (Gen 5 .40cal Glocks will not fit), Sig P320 (all models except .45, SubCompact, and metal frames of any kind) and the Sig P365/XL. The P365 Macro is not compatible with the Pro. Please see our Skeleton Macro Holster for support for Macro Variants.

NOTICE: Sig models with either factory or aftermarket metal frames will not fit the Pro Holster. And “Glock analog” pistols like P80 and Shadow Systems are not compatible with our Glock holsters.

PLEASE NOTE: The PHLster Pro Holster may be longer and wider than the muzzle of your gun.

This is intentional, and it aids in concealment and comfort for most body types. See the videos below to understand why it is made this way, and decide whether it’s right for you. Keep in mind that if you’re ordering a holster that fits multiple gun models (for example, g43, g43x, and g48), that the holster will be sized for the longest model.

Which holster model is right for me? | PHLSTER PRO HOLSTER VS SKELETON

The Keel Principle | Concealment Mechanics

  • Add DCC Monoblock: *

  • *

    Please Note: If the product is out of stock, it will not allow you to purchase it. Please select no above to add to your cart.

  • Add DCC Mod4 Kit: *

  • *

    Please Note: If the product is out of stock, it will not allow you to purchase it. Please select no above to add to your cart.

Product total

Options total

Grand total

Other products you might be interested in:

Fit Features

Slide Mounted Optic

Compatible

Suppressor Sights

Compatible

Orientation

Ambidextrous

Sweat Guard Height

Medium

Muzzle Device

Comped and Threaded Barrels

Fit

Glock 9mm/40 (G26-34)
Glock 43/43x/48 (And MOS)
Walther PDP/PDP-F
Sig P365/P365x/P365XL (with and without thumb safety)
Sig P320 M17, M18 (except .45/10mm, SubCompact, or metal frames)

Note: does not fit P80,
Shadow Systems, or other aftermarket frames.

Do you need extra holster length?*

*If you’re carrying a longer-muzzled gun or a revolver, adding extra holster length may not be necessary for you, but for short semiautomatic guns, it’s often helpful.

Guns with short muzzles can be top-heavy and difficult to conceal comfortably. To solve this, some holsters have extra length added to the muzzle end. Like the keel on a boat, the extra muzzle length helps balance the holster, making it more comfortable and easier to conceal. This is especially true if you have a bit of a belly, which tends to push the grip out more and make the muzzle dig in.

Note that while extra muzzle length reduces grip printing, it can increase muzzle printing, which can be a concern with lower carry positions and tight fitting pants such as leggings or yoga pants. 

Learn more about the Keel Principle here.