Choose your PHLster Enigma model to find instructions on how to assemble it and how to adjust it. You can also find helpful info about how to wear your Enigma, how to adjust the leg leash, how to get comfortable with it, tips and tricks for success, troubleshooting, and much more.
Once you’re 100% sure you’ve got your Enigma belt or leg leash fully adjusted the way you want it, you can trim the excess tail as needed (leave at least 6-8″ of extra belt) and sear it with a lighter to prevent fraying. Make sure to leave plenty of extra slack in case your weight […]
DO NOT CUT YOUR ENIGMA FACEPLATE The Enigma faceplate is made of a woven polycarbonate material. Cutting the faceplate will cause it to delaminate, and could cause the faceplate to fail. Failure of your holster system puts you at risk for severe injury or death. (It also voids your warranty, which will be the least […]
Since the Enigma does not come preassembled you will need 2 tools to go through your customization and set up process: A screwdriver and a set of pliers. If you have vice grip pliers, these would be preferable, but a simple set of pliers should do the trick. Helpful Links: Light Bearing Enigma Assembly Video […]
*If you’re carrying a longer-muzzled gun or a revolver, adding extra holster length may not be necessary for you, but for short semiautomatic guns, it’s often helpful.
Guns with short muzzles can be top-heavy and difficult to conceal comfortably. To solve this, some holsters have extra length added to the muzzle end. Like the keel on a boat, the extra muzzle length helps balance the holster, making it more comfortable and easier to conceal. This is especially true if you have a bit of a belly, which tends to push the grip out more and make the muzzle dig in.
Note that while extra muzzle length reduces grip printing, it can increase muzzle printing, which can be a concern with lower carry positions and tight fitting pants such as leggings or yoga pants.
